How to Use

TRAP MACHINES

  1. Plug in your system where you would normally plug in your pull cord (you must supply the connector that fits your machine/club). With the Autopuller, no alterations are made to the machines. You just unplug the regular pull cord and plug in your Autopuller system. When you are done, just replace the club's pull cord. On a wired system, plug the Autopuller controller into the long cord you supplied that plugs into the outlet for your regular pull cord. On a wireless system, you plug in the receiver which 'talks' wirelessly to the controller.
  2. Clip the microphone onto your collar. Turn the Autopuller on.
  3. Press the arming button on top of the Controller to arm the microphone.
  4. Call for your target. The Autopuller will release the target immediately at your call. Repeat steps 3 and 4 for each target that you want to launch.
  5. You can turn on the Rearm mode by pressing the circle on the front label marked "RA" to avoid pressing the arming button for each target.
  6. If you are shooting with a friend, you can press manual release button to launch the target immediately.


SKEET MACHINES

  1. Plug in your system where you normally plug in your pull cord (you must supply the connector that fits your machine/club) With the Autopuller, there is no alterations made to the machines. You just unplug the regular pull cord and plug in your Autopuller system. When you are done, just replace the club's pull cord. On a wired system you plug the Autopuller controller into the long cord you supplied that plugs into your field. On a wireless system, you plug in the receiver which 'talks' wirelessly to the controller.
  2. Clip on the microphone, turn the Autopuller on with the side thumb wheel.
  3. Press one of the top arming buttons to activate the microphone. Press both buttons for a double/pair/true pair.
  4. Call for your target(s).

The Autopuller will release the target immediately at your call.

Repeat steps 3 and 4 for each target you want to shoot.

On models with multiple modes, just press the circle on the label with the mode you want. For example if you have the Classic model and want to use the H/L mode, press the circle with "H/L" and the light will begin to flash letting you know it's in standby waiting for you to arm the desired house.

If you are shooting with a friend, you can press the arming button for the house you want and then press the manual release button to launch the target immediately.


SPORTING CLAY MACHINES

  1. Plug in your system where you normally plug in your pull cord (you must supply the connector that fits your machines/course) With the Autopuller, there is no alterations made to the machines. You just unplug the regular pull cord(s) and plug in your Autopuller system. When you are done, just replace the club's pull cord(s). On a wired system you plug the Autopuller controller into each station on your course. On a wireless system, you plug in the receiver, which 'talks' wirelessly to the controller.
  2. Clip on the microphone, turn on the Autopuller with the side thumbwheel.
  3. Press a top arming button to activate the microphone. Press both buttons to get a double.
  4. Call for your target(s). The Autopuller will release the target(s) immediately at your call.

Comes standard with a 4-wire/double outlet version for courses where the machines are not wired to a central outlet (but the wires do go to a common location. (If you need a 3-wire/single outlet please select the option before clicking the PayPal button, or inform us on phones orders.) If you are purchasing a wireless system for use for your own machines and they are not wired to a central location, then you may want to purchase a second receiver in order to not have wires from either thrower.

Press the circle on the front panel with the indicating letters "RP" for Report Pair, or "FP" for Following Pair to turn on the mode.

If you are shooting with a friend, you can press the arming button for the house you want and then press the manual release button to launch the target immediately.


SKEET & TRAP MACHINES

  1. Plug in your system where you normally plug in your pull cord (you must supply the connector that fits your machine/club) With the Autopuller, there is no alterations made to the machines. You just unplug the regular pull cord and plug in your Autopuller system. When you are done, just replace the club's pull cord. On a wired system you plug the Autopuller controller into the long cord you supplied that plugs into your field. On a wireless system, you plug in the receiver which 'talks' wirelessly to the controller.
  2. Clip on the microphone, turn the Autopuller on with the side thumb wheel.
  3. Press a top arming button to activate the microphone. Press both buttons for a double.
  4. Call for your target(s).

The Autopuller will release the target immediately at your call.

Repeat steps 3 and 4 for each target you want to shoot.

H/L mode - to launch both the high and the low single without pressing the arming button for the second target.

Rearm mode - to have the microphone rearm after each target so that you don't have to push the arming button again.

If you are shooting with a friend, you can press the arming button for the house you want and then press the manual release button to launch the target immediately.


SKEET & SPORTING CLAY MACHINES

  1. Plug in your system where you normally plug in your pull cord (you must supply the connector that fits your machine/club) With the Autopuller, there is no alterations made to the machines. You just unplug the regular pull cord and plug in your Autopuller system. When you are done, just replace the club's pull cord. On a wired system you plug the Autopuller controller into the long cord you supplied that plugs into your field. On a wireless system, you plug in the receiver which 'talks' wirelessly to the controller.
  2. Clip on the microphone, turn the Autopuller on with the side thumb wheel.
  3. Press a top arming button to activate the microphone. Press both buttons for a double/pair/true pair.
  4. Call for your target(s).

The Autopuller will release the target immediately at your call.

Repeat steps 3 and 4 for each target you want to shoot.

On models with multiple modes, just press the circle on the label with the mode you want. For example if you want to use the H/L mode, press the circle with "H/L" and the light will begin to flash letting you know it's in standby waiting for you to arm the desired house.

If you are shooting with a friend, you can press the arming button for the house you want and then press the manual release button to launch the target immediately.