Skeet & Trap Instructor Autopuller Controller

Skeet & Trap Instructor Premium

Regular price $419.00 Sale

Skeet & Trap Instructor Premium Autopuller Model STI5vt includes all the standard features, plus:

Voice Delay (VD)  a set delay between your call and launch. The same delay every time until you choose to change it. Range is from .05 seconds to 1 full second

Rearm (RA) After your shot, The Autopuller will automatically rearm the microphone for the last target that launched (you can adjust the amount of time that it takes for the Autopuller to rearm.)

American/International Delay (A/I) Delays the target launch after your call, random from 0, up to 1 second for American Skeet or 3 seconds for International Skeet

High/Low combo (H/L) the first target launches at your call. The sound of your gun arms the opposite target for your call.

Pull Cord (PC) The mode allows you to pull targets just by pushing the button. There is no Voice Launch involved. You press the High arming button to get a high Target, Low to get Low, and the Manual button becomes the doubles button.

 

$419 Wireless system includes:

  • The Controller (Measurements of controller box: 5 ½” x 2 ½” x 1”)
  • The Receiver with whip Antenna (Measurements of receiver 5 ½” x 2 ½” x 1”)
  •  Microphone
  •  2 adaptor cords to wire for your machine/field
  • Owner's Manual
  • Carrying Bag
  •  9v batteries

System does NOT include:

  • Connector for your machine/field

 (picture of wireless system contents - controllers vary)

 

$319 Wireless Controller only:
This is an extra controller that you can sync with any Autopuller Receiver to allow an additional shooter to call for targets at the same time.

 _________________________________

      (picture of wired system contents - controllers vary)

      $219 Wired system includes:

      • The controller with a 18" pigtail
      •  Measurements of controller box: 5 ½” x 2 ½” x 1”
      • Microphone
      • Carabineer for cord strain relief
      • Owner's Manual
      • Carrying Bag

      System does NOT include:

      • length of cord from machine to controller
      • connectors to go on cord to connect to the controller
      • Connector for your field machine to connect to cord.